Don't let your plow shares get this bad before replacement! Worn and dull shares do a poor job of plowing and in this case damaged the plow frogs to the point of needing replacement.
The below picture shows a worn (rusty) share laid on top of a new share to show how worn it is.
New Shares by WIESE available for HS and NU series plow bottoms in both 4 and 3 bolt sizes. These aren't the cheap rock shares, rather the heavy duty forged point long life shares. $25 each with hardware
MADE IN THE U.S.A.
Does your stomach turn when you see made in Mexico on your expensive OEM shares? We have USA Shares!
These WIESE plow shares are high quality and made in the USA. Bolts are included.
They are full-cut meaning they cut the whole furrow slice. Sometimes your plow may be equipped with the narrow cut version offered by Deere. If preferred, these shares can be shortened by the customer if desired. Wiese full-cut shares are approximately 2 inches longer overall as compared to their original JD counterparts...this will not hurt anything.
The 14-3 shares replace the following JD originals:
A10001, AA1001, BC452A, A10005, AA10005, BC460A, A10002, A10006
The 14-4 shares replace the following OEM Part numbers:
HS bottoms: A51498, A10225, A10025, AA10025, AA10225, BC480A, A51507, A10325, A10321, A10125, A14025, A51499, A10226, AA100226, BC482A
NU bottoms: A14222, A14325, A51498, A14225, A14221, A14025, A14226, A14326
The 16-4 shares replace the following OEM Part numbers:
HS/NU bottoms: A51500, A10227, AA10027, BC481A, A51508, A10327, A10127, A10323, A14027, A51501, A10228, AA10028, AA10228
Copyright 2017 Tyler the Plow Guy. All rights reserved.
Tyle the Plow Guy is in no way affiliated with Deere & Co.