HOME | MY TRACTORS | PARTS | EBAY | SOLD | Location

Here is a factory JD wide front axle (square housing). It was taken off of a 620 tractor and worked quite well and everything was set correctly (toe-in). It has some wear on the bushings, however will provide years of service if maintained. There are no breaks or welds other than the tie rods on this axle. One note, 3 of the 4 tie rods/drag links are not OEM and have been welded as shown in the photos below. It will need to be picked up on my dad's farm in SE Missouri (see the LOCATION link above).

THIS AXLE SOLD FOR $1050 AND IS GOING TO PENNSLYVANIA.

Click HERE to see the 620 JD tractor that this front axle was removed from.

 

Here it is on the 620 before removal

Center bolster and pivot plate are excellent

Rh side only thing is the tie rods and drag links aren't factory

LH side: again tie rod and drag link one is original and one is not

LH wheel is in nice condition: rims are great and are matched originals

RH side view

View from the top after removal: a little dirty here but everything is in excellent condition

RH steering arm and spindle housing

Nice!

Steering arm is nice, tie rods aren't original

non-original tie rods and drag links

a little more

RH wheel & rim; nice JD1290 rims in good conditon

Rh side

Center bolster & pivot plate

LH steering Arm--it is twisted but not broken

LH side; arm is twisted....maybe could be straightened

LH rim is nice JD1290 matching rims

Center plate

Hit Counter